Holms Spreading Bucket SB

Hot dip galvanized sand spreading bucked with 3-year anti-corrosion warranty

Three year

Anti-corrosion warranty

Direct drive

The hydraulic motor powers the outfeed roller

Versatile Sand Spreader

Sand, crusched rock and road salts

Holms SB - Performance

Performance

Sand Spreading Bucket of the highest quality

With Holms Spreading Bucket SB we thought a little longer than others. The sand spreader bucket is robot-welded and hot dip galvanized for the absolute best durability. Hot dip galvanized or galvanization provides extra protection against corrosion and in some cases the surface may self-heal. This gives longer service life and we offer a 3-year anti-corrosion warranty.

Smarter mixer

It is not uncommon for the grit to freeze. The mixer breaks up the grit and distributes it to the spreading roller, which eliminates the need for a protective grille and minimizes the risk of personal injury.

Well-protected hydraulic motor

The drive motor for the roller sits well-protected inside a drum that is mounted on the chassis and hidden in the outfeed roller. This also ensures the width of the attachment is kept to a minimum but also protection of vital parts.

 

Smart mixer

Wiggling motion

Protected hydraulic motor

Minimum width

Hot dip galvanized

Anti-corrosion bucket

Robot-welded and hot dip galvanized in Sweden

All parts of the bucket have been robot-welded, which ensures exceptional quality and safety. The hot dip galvanizing takes place near the factory in the neighboring town, Vadstena. We can proudly say that sand spreader is designed, refined and manufactured in Motala, Sweden.

Tractor or loader?

Our sand spreader buckets are suitable for tractors as well as loaders. Choose from our standard range of attachments. The brackets are screwable, which allows for the change of bracket.*

* Spreading Bucket 24 has welded Large BM bracket and can't be replaced.

Holms Attachments AB

Support legs

Our spreading bucket doesn´t just have an exceptional long life, it also can be equipped wit support legs. Easy, smart and convinient.

Another option for our spreading buckets is the wind and snow cover you can add to protect the gravel. 

Technical specification

ModelSB10SB16SB24
Working width210 cm230 cm250 cm
Volume, amount of material1,0 m³1,6 m³2,4 m³
Weight, empty400 kg660 kg800 kg
Recommended oil flow l/min40/15040/15040/150
ModelSB 10SB16SB 24
Working width6'11"7'1"8'2"
Volume, amount of material1.30 yd³2.09 yd³3.13 yd³
Weight, standard design882 lb1455 lb1763 lb
Recommended oil flow GPM11/40 11/4011/40
en_USEnglish