Holms Pick-up Sweeper PL
High-efficient Pick-up Sweeper with side brush and dust eliminating system, Dustbuster
Easy to operate
”Ready to sweep”
Effective dust elimination
Unsurpassed sweeping result with brush core that adapts to the slope of the ground. Self Adjusting Suspension.
Easy to operate
Floating gate design - Connect and drive
Equip the sweeper with Dustbuster to eliminate dust formation outside the sweeper.
Holms Pick-up Sweeper PL - Performance
Powerful sweeper for compact wheel loaders and tractors
Our Pick-up Sweeper PL, is without a doubt one of our most popular sweepers for tractors and skid steer loaders. The sweeper has a high sweeping volume and with our dust reduction kit the dust is eliminated and swept up.
The sweeper is designed to be as easy to sweep as possible. Connect the machine to the floating gate and hydraulics and drive. The sweeper follows height adjustments with minimal intervention from you as a driver.
Equipped with the dust reduction kit Dustbuster, the sweeper has a noise level of low 79dB
Brush core follows the ground
Minimal brush wear
Designed for best sweeping results with minimal brush wear
Correct ground pressure
Unique link arms provide correct ground pressure
Holms Pick-up Sweeper PL - Maximum adaptability
Self adjusting suspension
The floating gate designmeans that the attachment and the brush always follow the surface, regardless of which position the wearer is in. This provides minimal brush wear and compliance with slopes and irregularities. The sweeping result is improved further thanks to the brush core being supported on link arms that give the brush exactly the right ground pressure in all positions.
Self Adjusting Suspension simply means that the sweeper moves up and down and adapts to the changes in the road. It gives an optimal sweeping result with minimal brush wear.
Large waste container - large water tank
Long up time
With a large water tank and a frugal water pump, you get extra long driving time
Sweeper with low profile
Highly efficient water mist
Thick rubber sides
Reduced noise level
Low noise level
With Dustbuster installed, the sound level is 79db (A) 2m from the implement
Holms Pick-up Sweeper PL - Eliminate dust with Dustbuster
Dustbuster is an accessory to eliminate the amount of dust when sweeping. The technology is based on a system with a water mist that binds the dust behind dense rubber cloths. Cleaner air and better working environment.
Water mist binds the dust
Dustbuster has a design where dust and debris are brushed up by brushes in a container behind tight rubber sheets. During the work, both the container and the side brush are showered with a water mist to bind the dust. No dust is stirred up in the air, the only thing the machine leaves behind is a clean and moistened surface.
When the sweeper is equipped with our popular Dustbuster kit, it can be used indoors. For example in a warehouse or industry. The water mist means that the dust is greatly reduced and the work can continue.
Low noise level
When sweeping takes place behind dense rubber sheets, the noise level drops. The values for our Dustbuster have been measured at a low 79dB (A) 2 meters from the machine.
Uneven road when driving?
Is the road you sweep uneven and requires constant adjustment? Holms Pick-up Sweeper PL has a movable gate construction that allows the entire sweeper to move without adjustment from the cab.
Integrated hydraulic motor
The hydraulic motor is located inside the brush core to be protected and enable a compact design with minimal width.
13-pole connection for a stable power supply
All products from Holms Attachments that are equipped with wireless control comes with a
The receivers 13-pole connection follows the requirements in ISO 11446-1.
Holms recommends that the carrier is also using a 13-pole connection.
Don´t hesitate to contact Holms if you have any questions.
Holms offers a large number of different mounts, several different machine types. Choose freely from our standard range.
615 mm brush rings
The sweeper is equipped with Beeline (ring brush) which has a diameter of 615 mm. The brush roller is easily replaced by loosening the link arms that hold the brush core.
Hardox wear plate
The three wheels of the sweeper prevent the underside from scratching against the ground during normal driving. For more extreme sweeping with unnormal highs and lows the sweeper is equipped with Hardox steel wear plates to prevent damage.
Inspection and flush holes
On the side of the sweeper, the container, there are separate inspection and flush holes that allow you to easily inspect or clean the attachment after work.
Holms Pick-up Sweeper PL
The Holms Pick-up Sweeper PL is a highly efficient sweeper for front-mounted compact loaders and tractors. These are some of the features of the sweeper.
- Floating gate - Allows the attachment to follow the ground without adjustment from the driver.
- Boltdash on bracket
- Water tank with efficient water pump.
- Three cast iron support wheels. One front and two at the back of the sweeper.
- Side/Gutter brush (optional)
- Dust elimination with Dustbuster. Rubber sheets, water mist and side brush cover (optional)
- Led lighting
|Working width||150 cm||185 cm||215 cm||250 cm|
|Total width, incl side/gutter brush||160 cm||195 cm||225 cm||282 cm|
|Height, excl. bracket||80 cm||80 cm||80 cm||80 cm|
|Water tank, volume||190 l||240 l||240 l||270 l|
|Bucket capacity, gross volume||170 l||220 l||250 l||290 l|
|Weight, full w.tank, bucket, sidebrush and wheel||900 kg||1050 kg||1100 kg||1150 kg|
|Weight, excl. bracket||290 kg||305 kg||320 kg||335 kg|
|Brush diameter||600 mm||600 mm||600 mm||600 mm|
|Recommended oilflow with flow limiter||40/100 l/min||40/100 l/min||40/100 l/min||40/100 l/min|
|Recommended oilflow without flow limiter||40/60 l/min||40/60 l/min||40/60 l/min||40/60 l/min|
|Total width, incl side/gutter brush||5'3"||6'5"||7'4"||9'3"|
|Height, excl. bracket||2'7"||2'7"||2'7"||2'7"|
|Water tank, volume||50 US gal||63 US gal||63 US gal||71 US gal|
|Bucket capacity, gross volume||45 US gal||58 US gal||66 US gal||76 US gal|
|Weight, full w.tank, bucket, sidebrush and wheel||1984 lb||2314 lb||2425 lb||2535 lb|
|Weight, excl. bracket||639 lb||672 lb||705 lb||738 lb|
|Recommended oilflow with flow limiter||8/34 US gpm||8/34 US gpm||8/34 US gpm||8/34 US gpm|
|Recommended oilflow without flow limiter||8/16 US gpm||8/16 US gpm||8/16 US gpm||8/16 US gpm|